KH-M-01
Mashrabiya Star 8
600 × 600 mm · 404 cut elements
Traditional North African mashrabiya star lattice, cut as a window screen, room divider or decorative facade panel
Technical annex
Adaptable patterns
These are 50 patterns we drew ourselves from plain geometry: adaptable concepts, not evidence of finished projects, and none of them is a photo of work we have delivered. The photo catalogue is what sells a design; this annex is where a buyer checks sizes, element counts and feasibility. Pick one, tell us the finished size, material and thickness, and we adapt it to your job. The cutting file stays with us.
Sizes are the drawn sizes in millimetres, and every pattern can be rescaled, repeated or cropped. Patterns marked “engraved” carry surface scoring as well as cut lines. We keep the cutting file and cut the part ourselves. Send us a drawing, a photo or a sketch and we draw it for you.
KH-M-02
Honeycomb Screen
600 × 600 mm · 1132 cut elements
Stiff honeycomb screen for railings, balustrades and guards, opened up by a regular hexagonal grid
KH-M-03
Quatrefoil Lattice
600 × 600 mm · 61 cut elements
Interlocking circle lattice from the classic arabesque construction grid, for screens, dividers and facade panels
KH-M-04
Basket Weave
600 × 600 mm · 200 cut elements
Diagonal basket-weave slot pattern that reads as woven metal, for balustrades, screens and cabinet fronts
KH-M-05
Graduated Perforation
600 × 600 mm · 260 cut elements
Graduated perforation, dense at the base and opening out towards the top, for screens and balustrade infill
KH-M-06
Triangulated Mesh
600 × 600 mm · 112 cut elements
Triangulated mesh, the most rigid of the open patterns, for structural screens, guards and machine enclosures
KH-D-01
Sunburst Door Panel
450 × 1800 mm · 1030 cut elements
Sunburst door panel, a fan of arcs and rays rising from the sill, for gate leaves and entrance doors
KH-D-02
Chevron Gate Panel
450 × 1800 mm · 88 cut elements
Deep chevron slats that give privacy from the street while staying open from inside, for gates and doors
KH-D-03
Rosette Medallion
700 × 700 mm · 870 cut elements
Round rosette medallion used as a centre feature for a gate leaf, a door panel or a table top
KH-M-07
Diamond Lattice
600 × 600 mm · 260 cut elements
Quiet diamond lattice, the calmest of the patterns, well suited to screens placed behind glass
KH-M-08
Wave Facade Panel
600 × 900 mm · 742 cut elements
Wave-slat facade panel that softens a long elevation, for screens, balcony fronts and large wall panels
KH-A-01
Pointed Arch Panel
450 × 1800 mm · 516 cut elements
Pointed-arch window motif that reads immediately as North African, for screens, doors and facade panels
KH-A-02
Greek Key Frame
600 × 600 mm · 604 cut elements
Classic Greek key border used as architectural frame work around doors, gates and wall panels
KH-D-04
Arch Room Divider
900 × 2000 mm · 64 cut elements
Tall room divider with interlocking arch bands, open enough to keep the light moving through the room
KH-H-01
Roman Bar Clock
400 × 400 mm · 51 cut elements
Roman-bar wall clock with heavy hour bars and an 8 mm centre hole that takes a standard clock movement
KH-H-02
Sunburst Clock
400 × 400 mm · 111 cut elements
Sunburst wall clock with rays around an open centre and hour dots on the rim, for a standard movement
KH-H-03
Star Clock
400 × 400 mm · 70 cut elements
Wall clock built around the eight-point mashrabiya star, with the centre hole for a standard movement
KH-H-04
Tree of Life Wall Art
600 × 800 mm · 62 cut elements
Tree of life wall art cut as one connected piece, hanging from four points, for a wall inside or out
KH-H-05
Hexagon Wall Art
700 × 700 mm · 186 cut elements
Hexagon cluster wall art in three sizes, cut as one piece to fill a wall with a clean geometric pattern
KH-H-06
Mirror Frame
500 × 700 mm · 62 cut elements
Mirror or picture frame with a cut border, sized so the glass sits behind it and is held from the back
KH-S-01
Kufic Grid Panel
600 × 400 mm · 212 cut elements
Square kufic grid that reads as calligraphy without being text, for signage, screens and feature walls
KH-S-02
Company Sign Plate
600 × 300 mm · 52 cut elements
Company sign plate with a patterned border, a clear centre for the cut-out name and mounting holes in the file
KH-S-03
House Number Plate
200 × 320 mm · 34 cut elements
House-number plate with frame and border dots, an open centre for the digits and mounting holes already cut
KH-S-04
Door Name Plate
260 × 120 mm · 36 cut elements
Door name plate with an open centre for the cut-out name, a dotted border and four mounting holes
KH-M-09
Olive Branch Panel
600 × 900 mm · 113 cut elements
Tunisian olive branch with leaves and olives, cut as a wall panel or screen for a Mediterranean interior
KH-M-10
Zellige Star Lattice
600 × 600 mm · 560 cut elements
Eight-point star and cross zellige tiling, an interlocking geometric screen for facades, dividers and doors
KH-D-05
Date Palm Panel
450 × 1800 mm · 446 cut elements
Date palm with a chevron trunk and a fanned crown of drooping fronds, for a gate leaf or a tall door panel
KH-H-07
Wave Balustrade Infill
1200 × 400 mm · 520 cut elements
Two interleaved wave bands tied by vertical struts, a rigid infill for balcony and terrace railings
KH-H-08
Ring Trivet
220 × 220 mm · 50 cut elements
Concentric rings on radial bridges with three feet, holding hot pots and pans off a table or worktop
KH-H-09
Shelf Bracket
250 × 250 mm · 23 cut elements
L bracket with a triangulated web and countersunk holes on both legs, carrying a shelf on a wall or frame
KH-H-10
Pendant Lamp Panel
400 × 600 mm · 109 cut elements
Pendant lamp shade panel with teardrop perforations that grow towards the lower edge, letting the light fall
KH-S-05
Letter-box Plate
300 × 200 mm · 24 cut elements
Letter-box front plate: a rounded slot, a name window above it and four mounting holes, ready to fit
KH-D-06
Star Lattice Door
900 × 2100 mm · 568 cut elements
Eight-point star lattice over the full height of the leaf, with a horizontal mid-rail and a slim border; a dense, stiff door leaf for entrances and gates where privacy matters.
KH-D-07
Rosette Greek-key Door
900 × 2100 mm · 424 cut elements
Central circular rosette of two rings with sixteen radial spokes and an eight-point star, framed by a Greek-key border of right-angle strokes; a decorative leaf for entrance doors and gates.
KH-D-08
Half-round Lattice Door
950 × 2100 mm · 422 cut elements
Half-round fan lattice of five concentric arcs and radiating spokes, with a stack of horizontal slits beside it; for doors and gates that need a lighter, more open leaf.
KH-D-09
Louvre Door
900 × 2100 mm · 172 cut elements
Nine horizontal louvre blades below a mid-height star band, with vertical glazing bars above; a ventilated lower leaf with an open top, for plant rooms, cupboards and back doors.
KH-D-10
Kufic Band Door
900 × 2100 mm · 148 cut elements
Kufic-style bands top and bottom around a quiet middle with two vertical slits, a horizontal tie and a single eight-point star; for entrance doors and gate leaves.
KH-D-11
Zellige Tile Door
900 × 2100 mm · 1044 cut elements
Star-and-cross zellige tiling over the full height, with a border band top and bottom; a dense, very stiff leaf for entrance doors and gates where privacy comes first.
KH-D-12
Peacock Fan Door
950 × 2100 mm · 192 cut elements
Nine-feather peacock fan of arcs and ribs with engraved feather tips, over a slatted skirt; a decorative upper leaf for entrance doors and gates.
KH-D-13
Oculus Lattice Door
900 × 2100 mm · 516 cut elements
Round oculus of two rings and twelve radial spokes above a rectangular star lattice and a stack of horizontal slits; for doors and gates with a round window and a lighter lower leaf.
KH-A-03
Arch Lattice Gate
1000 × 1800 mm · 486 cut elements
Pointed-arch head over a star lattice body; a gate leaf for garden and courtyard gates, stiff enough to hang from hinges without a frame.
KH-M-11
Scallop Screen
600 × 1200 mm · 1924 cut elements
Overlapping scallop rows, offset from row to row; for balustrade infill, window screens and room dividers.
KH-M-12
Branching Room Divider
1200 × 2400 mm · 240 cut elements
Bare-tree divider: a trunk that keeps splitting into rising branches; for room dividers and decorative screens where the openings carry the design.
KH-H-11
Geometric Wall Clock
400 × 400 mm · 215 cut elements
Wall clock face: square plate, round outer ring, eight-point star and twelve hour bars, with a centre hole for the movement; for interiors and entrance areas.
KH-H-12
Arch Mirror Frame
500 × 1000 mm · 480 cut elements
Arch mirror frame with a graded lattice crest over vertical sides and horizontal rungs; takes a mirror glass behind, for hallways and bathrooms.
KH-H-13
Backlit Botanical Panel
700 × 1500 mm · 216 cut elements
Botanical panel with a heavy trunk, leaves and grass, drawn as a bold silhouette so light reads through the openings; for backlit wall panels and partitions.
KH-S-06
Scallop House Sign
300 × 200 mm · 14 cut elements
House-shaped plate with a scalloped top edge of five circles and an engraved number area; for house numbers and small name plates.
KH-S-07
Wreath Name Sign
600 × 300 mm · 125 cut elements
Rectangular name sign with a wreath of leaves and berries around an engraved name zone; for house entrances and gates.
KH-S-08
Round Business Sign
420 × 420 mm · 492 cut elements
Round business sign: circular plate, slim double rim with tick marks, a central name zone and mounting holes; for shopfronts and entrance walls.
KH-S-09
Halo-lit Logo Sign
800 × 400 mm · 478 cut elements
Logo sign plate: slim rectangular panel with a wordmark zone and two horizontal rules, drawn for halo-lit mounting on a wall; for shopfronts and reception walls.