CNC fiber laser cutting
Clean cuts with minimal burr in stainless, mild steel and aluminium: fine contours, engraving and perforated patterns included.
Metal fabrication since the first cut
CNC fiber laser cutting and stainless steel fabrication, made in Tunisia, built for Europe.
STE KHALDOUN INDUSPRO SUARL cuts, bends, welds and finishes sheet metal within our own company: professional kitchen equipment, architectural decorative panels, and custom parts produced directly from your DXF or DWG files.
- 1 to 1000+
- Prototype to series
- EU
- Sold via resellers
Production in our company
Cutting · bending · welding · finishing
Fiber laserPower and bed size to be confirmed
MaterialsStainless steel · mild steel · aluminium
File formatsDXF · DWG · STEP · PDF drawing
VolumesSingle parts, batches and series
What we do
One facility, the full sheet metal chain.
Nothing is subcontracted out of our control: the part is cut, formed, assembled and finished under the same roof, which is why lead times stay short and tolerances stay consistent.
Bending & forming
Press brake bending of panels, enclosures, frames and profiles, with repeatable angles across a full production batch.
Welding & assembly
TIG and MIG welded stainless assemblies, ground and polished where the joint stays visible on the finished product.
Finishing
Deburring, brushing, polishing and painted or powder coated surfaces depending on where the part will be used.
Design & DXF preparation
We take a sketch, a photo or a technical drawing and turn it into a DXF ready for production, with nesting and kerf compensation included.
Contract manufacturing
Recurring production of your own components to your drawings, packed and shipped on a fixed schedule.
Work we take in
Send us the sheet work your own shop is too busy to do, or too expensive to take on.
A large part of what we do is straightforward job work for other companies: they send the material or the drawing, we cut, bend and finish it, and it goes back. Same service a German subcontractor gives you, at a Tunisian production rate; preferential duty treatment into the EU applies only where the origin rules are met.
Send a photo, sketch or PDF: we review it by hand, prepare the cutting drawing, and manufacture the part once you approve the material and dimensions. The cutting file stays in our own production.
Laser cutting to order
You send the file or the drawing, we cut the parts. Sheet supplied by us or by you. Single pieces, batches, or a fixed quantity every month.
Bending & folding
Press brake work on your parts: single folds, boxes, channels, hems and repeated angles across a whole batch. Send flat blanks, get formed parts back.
Cutting sheet to size
Full sheets cut down to the blanks you need, squared and stacked, ready to go straight into your own process without a second handling step.
Welding & assembly
TIG and MIG on stainless and steel, ground and polished where the seam shows. We can deliver the finished assembly rather than a box of parts.
Finishing
Deburring, brushing, polishing, paint or powder coating: the part arrives ready to install or ready to sell, not ready for more work.
Overflow capacity
Booked solid for a month? Hand us the overflow. We work to your drawings, your tolerances and your packaging, and your customer never sees a difference.
Tell us what the job is (material, thickness, quantity, how many folds) and we review it and send you a price. Ask for a single test part first.
Ask for a priceProduct lines
Three things we build every week.
Our own catalogue of professional equipment, decorative architectural metal, and custom parts produced to customer drawings.
Commercial kitchen equipment
Crepe machines (single and double plate), griddles and planchas, fryers and stainless furniture for restaurants, snack bars, hotels and caterers, built for continuous service, not for a home kitchen.
Architectural & decorative metal
Screens, moucharabieh panels, gates, railings, house numbers, signs and lettering, wall art and room dividers cut by laser: geometric patterns cut to your dimensions, in steel or stainless, ready to paint or coat.
Custom parts & OEM components
Brackets, enclosures, frames, plate holders, machine covers, replacement parts and prototypes produced from your DXF, DWG or STEP file, as one piece or a full series.
From file to finished part
Already have a DXF?
Drop it in and read the outside size, cut length, pierces and weight straight away. DXF, DWG, STEP or a dimensioned PDF: all accepted; no drawing ever leaves your browser.
Get a quote on your file
Drop a DXF here, or click to choose
Read in your own browser: the drawing is never uploaded
Selected work
Real parts, out of our own production.
Every photo below is production from Khaldoun Induspro: no catalogue images, no stock photography.
How we work
Four steps from enquiry to delivery.
-
1
Enquiry
Send the drawing or describe the part: material, thickness, quantity, deadline.
-
2
Quote after review
Fixed price per piece, lead time, and any technical remark on the file.
-
3
Production
Cutting, bending, welding and finishing in our own production, with photos on request.
-
4
Delivery
Packed and shipped across Tunisia, and supplied to overseas buyers through our Tunisian resellers.
Why Khaldoun Induspro
Tunisian production cost, European working culture.
We are two hours by air from southern Europe, in the same working week and almost the same time zone. You talk to the people who actually run the machines, in English, German, French or Arabic, and you get an answer the same day.
Direct contactNo agency layer between you and our own production.
Cost advantageCompetitive part price on fabrication that needs a lot of labour.
Manager in GermanyA manager of the company, based in Munich, Germany.
Flexible volumeA single prototype is as welcome as a repeat series.
Buying from abroad
Our Tunisian resellers serve buyers abroad.
We supply stores across Tunisia: Tunis, Béja, Sousse, Médenine and Sfax. Buyers in France, Italy and Algeria order through those Tunisian resellers. The customs authority determines the duty treatment for the commodity code. Under the EU and Tunisia Association Agreement, industrial goods of Tunisian origin may enter the EU at 0 % duty where the preferential origin rules are met. This is a condition, not an automatic entitlement.
The applicable set is confirmed per shipment. Duty rates and origin rules are set by the customs authorities; the buyer's broker applies or confirms the treatment for their commodity code.
- Customs duty
- Conditional: 0 % only where the preferential origin rules are met; the customs authority determines the treatment.
- Proof of origin
- An EUR.1 movement certificate can be issued by the Tunisian customs authority if the goods qualify for preferential origin; it is not required for every shipment.
- Incoterms
- EXW Medjez El-Bab, or delivered to your door on request
- Import VAT
- Paid by you at import and normally reclaimable; ask your tax adviser
- Documents with every shipment
- The applicable set is confirmed per shipment. Duty rates and origin rules are set by the customs authorities; the buyer's broker applies or confirms the treatment for their commodity code.
Origin rules and duty rates are set by the EU and Tunisian customs, not by us, and they can change. We state them here so you can verify them before you order. Your own customs broker will confirm the treatment for your commodity code.
The company
STE KHALDOUN INDUSPRO SUARL
An industrial metal fabrication company in Medjez El-Bab, in the Béja governorate of northern Tunisia. We started by building professional kitchen equipment for the Tunisian hospitality market and grew into general sheet metal fabrication when we installed our fiber laser.
Today the same company serves restaurants and hotels, architects and interior projects, and industrial customers who need metal parts made to their own drawings, and we take on work from buyers in Europe.
- Legal form
- SUARL
- Location
- IDEN, Medjez El-Bab 9070, Béja, Tunisia
- Sector
- Fabricated metal products manufacturing
- Languages
- Arabic · French · English · German
Contact
Tell us what you need made.
Send the drawing, the quantity and the deadline. We review it and send you a price and a lead time, in English, German, French or Arabic.
-
Email…
-
Phone…
-
Fax78-560-784
-
WhatsApp…
-
FacilityIDEN, Medjez El-Bab 9070, Béja, Tunisia
-
Manager, Munich…
-
LinkedInKhaled Ben Younes